Do you want to know what are the key points to buy the dive boots that suitable for you? Would you like to find some good shoes without spending more money than necessary?
In this post, you will find the best information to make the best choice.
The diving boots or booties and the escaping fulfill several important functions to improve the comfort during your dives:
They Protect The Cold:
The feet, along with the hands, are the first places in the body where the loss of body heat begins when we are in the water, so it is important to wear boots that help us to keep warm, especially in diving In cold water.
They allow you to walk comfortably to the place of the dive avoiding the hassles and dangers of doing it barefoot and providing more traction on slippery surfaces. It is especially relevant when leaving the coast.
Protect The Feet
They protect the feet from possible scrapes of the fins. They are essential if adjustable fins are used.
Top 3 Best Scuba Diving Boots: Editor's Pick
|Cressi Premium Neoprene 5mm|
|Mares Flexa DS 5mm|
|Cressi Lux 5mm|
What Scuba Diving Boots or Diving Shoes to Buy?
Remember that the important thing is to find the ideal boots for you, which is not synonymous with having to buy the most expensive model on the market, nor that the model that takes your buddy dive is the most suitable for you.
Here is a list of the key points to take into account when choosing the diving boots that best suit your needs.
The Thickness of The Boots: Where Are You Going to Dive?
The temperature of the water and your tolerance to the cold will be the key factors to take into account when choosing the thickness of the boots.
You can find boots and boots from 2mm up to 7mm.
For guidance, I recommend the following thickness:
- 2-3mm : warm water (above 22-23 ° C)
- 5-7mm : temperate and cold waters (below 19-20 ° C)
You can also add thermal socks to increase the protection of your boots if you are going to dive occasionally in colder waters or during the winter.
Tips: If you doubt the thickness of your booties, I recommend you choose a model by pulling thick. It is rare for snorkeling to feel the excessive heat in the feet, so a 5mm model will be more functional to dive in different places with the same boots.
Sole Type: Where Are You Going to Walk?
The thickness will depend on the type of dives you do: are they usually from a boat? Or in general coast salts?
We can differentiate between:
- Soft sole: ideal for boat diving or fine sandy beaches. They have the advantage of being more flexible, which is more comfortable, especially if you have wide feet.
- Hard sole: especially useful for diving from shore, as it protects you when walking on rocks or hot sand.
Tip : Personally, I prefer sturdy soles , which allow you to walk on rocks or complicated beaches without problem. Even if you have to walk a section to the port, you can do it directly with the boots on, without danger of scratches or burned by the heat of the asphalt.
Types of Neoprene Boots and Booties
The boots can be divided according to the anatomical cut in:
High profile: totally cover the ankle, providing greater thermal protection and support for your ankle. For me, they are the type of boot of choice for its greater protection and versatility.
Low profile: ends just below the ankle. Designed for snorkeling in tropical waters or snorkeling and other water sports. The main drawback is that they do not protect the ankle.
The boots can have zippers, loop with velcro or elastic t-shirts to facilitate their placement, especially useful for those of greater thickness.
These systems are especially indicated if you have wide feet or very steep instep. The counterpoint is that they make the booties somewhat less watertight, although each time the systems are more improved, minimizing this problem.
Some boots incorporate a rubber tongue at the top of the heel so that the flap of the flap does not slide down, thus avoiding the possibility of flapping out during the dive.
Tip: I recommend the boots with reinforcements in the toe and heel, since the continuous friction with the fin when swimming makes these two areas are the first to wear out and to be bored. In addition to being aesthetic go teaching the toes, these holes make the boots leak, which is essential to keep warm.
What Kind of Fins Are You Going to Dive With?
Adjustable flaps: in this case the use of the boots is essential. I recommend you boots with soles to be able to walk comfortably out of the water.
Flats: I recommend the use of diving socks or fine boots.
Choosing the Size of Neoprene Boots
Boots are the underwater equivalent of your street shoes. For this reason, they should be adapted to your feet comfortably, being tight but not tight.
If you are large, the foot will dance inside the boot, resulting in discomfort and scrapes.
If you are too small, you will wear your shrunken foot (note that the boot will compress somewhat more as you descend deeper), which may end up producing some cramp.
I recommend that if you also want to buy some fins, do it while you get your boots, to make sure that they adapt as well as possible and that you choose the appropriate size of fins. If you want more information to choose the best diving fins for you, check out this Guide with the 5 key points to make the best choice.
If you buy the fins later, wear your boots or boots with you if you are going to try them and vice versa.
Key Points for the Best Choice of Your Diving Boots
1. Thickness : As more frioler @ seas and lower water temperature where you dive regularly, more neoprene thickness will need.
2. Sole: Soft or hard depending on the type of surfaces you are going to walk on and the fins you carry.
3. Profile: low or high according to the type of immersions in warm or cold waters. Better if the boots are reinforced in toe and heel.
4. Size: tight but not tight. Remember to try fins and boots together, to ensure maximum adaptability and comfort.
Tips for Maintenance Your Diving Boots
The way to take care of your boots is similar to how to do it with your suit and gloves:
- Rinse them with fresh water. To optimize the cleaning, you can leave them in water with baby soap for a while and then rinse them.
- Let them dry completely in a well-ventilated place (avoiding direct sunlight).
- Store them in a dry place.
- If you wear a dry scuba suit, wearing boots above the sneakers integrated in the suit will help reinforce the thermal insulation, while prolonging the life of the suit's scarf, avoiding premature wear. This will prolong the tightness of your suit.
- Before buying your boots, if you have the possibility, try different models in the dive centers. This will help you decide the thickness you need and the type of boot that is most comfortable for you.
Best Scuba Diving boots Reviews:
I leave you a list with models of boots with the best quality / price ratio and guaranteed results.
1. Cressi Premium Neoprene 5mm
Simple but functional model and very well finished. They have a very soft sole but well reinforced and with good grip, in addition to reinforcements in toe and heel, as well as tab for the fins. Ideal if you do various dives, usually from boat and want a good scarf without spending a lot of money.
2. Mares Flexa DS 5mm
Hard sole, reinforcement in forefoot and heel and flap to prevent loss of fins. Ideal for all types of diving, especially with exits from shore. For diving in colder waters, you have the model in 6.5mm.
3. Cressi Lux 5mm
Hard sole and reinforced toe and heel. Zipper well sealed and with the extra point of having a velcro at the top to prevent unintentional opening of the zipper with wear. Ideal for all types of diving, and especially useful when leaving the coast.
4. Scubapro Heavy Duty 6.5mm
Hard sole, pointed and heel reinforcements and anti-slip tongue for fins. They also have velcro closure at the top of the zipper. Ideal for diving in cold waters.
5. Mares Equator 2mm
Soft sole with reinforced toe and back, good grip and very light, making them ideal for trips to warm water areas.